EKO compressed air filters are a robust, well-tested filter,
that can be adapted to all your needs for clean compressed air.
Our filter is designed to provide the same, or better, compared to the OEM filter.
The filter designs are tried and tested, just as they undergo high quality control.
The filter housings are made of die-cast aluminum and are coated on the inside, so corrosion is avoided, and thus the filter has a long service life.
The capacity starts from the minimum of 1.02 m3 / min. up to 37.2 m3 / min. at low pressure drop.
EKO compressed air filter is as standard, made in a particularly robust design, with greater temperature resistance and resistance to wear.
The complete filters are supplied as standard with internal or external mechanical drains.
Pop up indicator or difference pressure gauge, which shows the condition of the filter.
Elements for EKO compressed air filters, from EKO-Filters offers a reliable and energy efficient alternative to the OEM elements, but with several advantages.
Filter elements are available in the following grades, for EKO compressed air filters:
|X5||25µ||Removes large drops of oil / water and large dust particles|
|X1||X1||Removes solid particles and oil / water
down to 1µ
Pre-filter for dryer and submicron filter.
|XA||0,01µ||Remove solid and oil particles
down to 0.01µ
Set after a refrigeration dryer, or before a membrane / adsorption dryer.
|X1R||1µ||Dust filter 1µ, removes dust after an adsorption dryer.|
|XAR||0,01µ||Dust filter 1µ, removes dust particles after adsorption dryer, or a coal tower.|
|XAA||0,01µ||Remove solid and oil particles
down to 0.01µ
|ACS||Aktiv kul||Activated carbon element, remove oil vapors.|