How to Choose the Right BEKOMAT

The right condensate drain depends on your compressed air system. When choosing a BEKOMAT, it is important to consider more than just the size of the compressor.

The most important factors are capacity, operating pressure, condensate type, and where the BEKOMAT will be installed.

  1. Where will the BEKOMAT be installed?

Start by determining where the condensate needs to be removed.

BEKOMAT condensate drains can be used on, among other things:

  • Compressors
  • Compressed air receivers
  • Compressed air filters
  • Water separators
  • Refrigerated dryers
  • Other condensate collection points

The installation location affects both the choice of BEKOMAT model and the required capacity.

View all BEKOMAT condensate drains →

  1. What is the air flow rate?

The compressor’s capacity is an important starting point when sizing a BEKOMAT condensate drain.

Capacity is normally specified in m³/min.

As a general rule, the BEKOMAT should be able to handle the expected amount of condensate from the installation where it is fitted.

If there are several condensate sources, each condensate drain should be assessed separately.

  1. What pressure does the system operate at?

Check the pressure at the location where the BEKOMAT will be installed.

BEKOMAT models have different pressure limits, and the selected model must be suitable for the system’s operating pressure.

Always check both the normal operating pressure and any maximum pressure.

  1. What type of condensate is produced?

Condensate can vary depending on the type of compressed air system.

For example, a system with an oil-injected compressor may produce oil-containing condensate, while an oil-free system has different conditions.

For more demanding or aggressive condensates, a BEKOMAT CO model may be relevant.

Choosing the right material is important to ensure a long service life and reliable operation.

Which BEKOMAT series should you choose?

BEKOMAT is available in several series developed for different applications.

BEKOMAT 12, 13, 14 and 16
A series designed for many standard industrial compressed air systems.

The models are available in different capacities, allowing them to be adapted to both smaller and larger compressed air systems.

BEKOMAT 20
A compact solution used, among other things, for compressed air filters and water separators.

BEKOMAT 20 is also available as BEKOMAT 20 FM, with filter management functions.

BEKOMAT 31U, 32U and 33U
These models are designed for simple and quick servicing.

The service unit can be replaced while components such as the electronics and sensor remain in place. This can simplify maintenance and reduce service work.

CO models
The CO versions are designed for more demanding condensates and feature a special surface treatment.

They may be relevant for oil-free compression and other installations where the condensate places greater demands on the materials.

Quick Guide to Choosing a BEKOMAT

If you have… Consider…
A standard industrial compressed air system BEKOMAT 12–16
A compressed air filter or water separator BEKOMAT 20
A need for filter management BEKOMAT 20 FM
A focus on simple servicing BEKOMAT 31U–33U
Demanding or aggressive condensate CO models
A special installation Special models

Need help choosing the right BEKOMAT?

To select the right BEKOMAT condensate drain, you should know at least:

  • Compressor capacity in m³/min
  • Operating pressure in bar
  • Where the BEKOMAT will be installed
  • Whether the compressor is oil-injected or oil-free
  • Type of condensate
  • Required electrical connection

With this information, it is much easier to find a condensate drain that is suitable for your specific compressed air system.

Contact us if you are unsure which BEKOMAT to choose →

Choosing a BEKOMAT?

If you are unsure about the correct BEKOMAT model or size, it is better to check your system data before placing an order. A correctly sized BEKOMAT ensures that condensate can be discharged efficiently and that the condensate drain is suitable for the operating conditions of the installation.

View all BEKOMAT condensate drains →

Still unsure? Contact us – we will help you find the right BEKOMAT.