BEKOMAT – automatic condensate drain for compressed air

BEKOMAT is an automatic condensate drain from BEKO TECHNOLOGIES, designed for the efficient removal of condensate from compressed air systems. BEKOMAT is used in a wide range of applications, including compressors, compressed air receivers, filters, water separators and dryers.

When air is compressed, condensate is generated and may contain water, oil and other contaminants. It is therefore important to remove condensate efficiently from the compressed air system.

How does a BEKOMAT work?

BEKOMAT uses electronic level control to detect when condensate needs to be discharged.

When the condensate reaches a defined level, the valve opens automatically and the condensate is discharged. Once the condensate has been removed, the valve closes again.

This means that BEKOMAT does not operate at fixed time intervals, but according to the actual amount of condensate present.

This helps minimise unnecessary compressed air loss and can therefore reduce energy consumption.

Benefits of BEKOMAT

  • Automatic condensate discharge
  • Electronic level control
  • Reduced risk of compressed air loss
  • Energy-efficient operation
  • Automatic operation without manual draining
  • Models for different capacities and operating conditions
  • Models available for demanding condensate applications
  • Service-friendly models for quick and easy maintenance

Where is BEKOMAT used?

BEKOMAT can be used at various points in a compressed air system where condensate accumulates.

Typical applications include:

  • Compressors: Condensate is naturally generated during the air compression process.
  • Compressed air receivers: Water and contaminants can accumulate at the bottom of the receiver.
  • Compressed air filters: Filters collect condensate, oil and other contaminants.
  • Water separators: Condensate is separated from the compressed air and must then be safely discharged.
  • Dryers: Condensate can also be generated during the drying of compressed air.

BEKOMAT Zero Airloss

An important feature of BEKOMAT is its level-controlled condensate discharge.

A traditional timer-controlled drain opens at predetermined intervals, even when there is no condensate to remove. This can result in unnecessary compressed air loss.

BEKOMAT opens only when required. This can reduce unnecessary compressed air consumption and make condensate discharge more energy-efficient.

BEKOMAT for different requirements

BEKOMAT is available in several series and models, allowing the solution to be adapted to different compressed air systems.

The range includes models for smaller installations, industrial systems, filters and water separators, as well as models designed for larger amounts of condensate and more demanding applications.

There are also CO models with increased resistance to demanding condensate applications, as well as models with service-friendly replacement of the service unit.

In summary

BEKOMAT is an automatic condensate drain for compressed air that detects the condensate level and discharges condensate when required.

This provides a simple and efficient solution for automatic condensate discharge and helps minimise unnecessary compressed air loss.

Are you unsure which BEKOMAT you need?See our guide on how to choose the right model.

If you need help finding the right solution, you are also welcome to contact us.